User-defined projections

You create user defined projections using JavaScript. For example, the my_demo_projection_result projection below counts the number of myEventType events from the account-1 stream. It then uses the transformBy function to change the final state:

options({
    resultStreamName: "my_demo_projection_result",
    $includeLinks:    false,
    reorderEvents:    false,
    processingLag:    0
})

fromStream('account-1')
    .when({
        $init: function () {
            return {
                count: 0
            }
        },
        myEventType: function (state, event) {
            state.count += 1;
        }
    })
    .transformBy(function (state) {
        return {Total: state.count}
    })
    .outputState()

Projections API

Below, you can find the JavaScript API for user defined projections.

Options

Name	Description	Notes
resultStreamName	Overrides the default resulting stream name for the outputState() transformation, which is $projections-{projection-name}-result.
$includeLinks	Configures the projection to include/exclude link to events.	Default: false
processingLag	When reorderEvents is enabled, this value is used to compare the total milliseconds between the first and last events in the buffer and if the value is equal or greater, the events in the buffer are processed. The buffer is an ordered list of events.	Default: 500ms. Only valid for fromStreams() selector
reorderEvents	Process events by storing a buffer of events ordered by their prepare position	Default: false. Only valid for fromStreams() selector

Selectors

Selector	Description	Notes
fromAll()	Selects events from the $all stream.	**
Provides** partitionBy when foreachStream outputState
fromCategory({category})	Selects events from the $ce-{category} stream.	**
Provides** partitionBy when foreachStream outputState
fromStream({streamId})	Selects events from the streamId stream.	**
Provides** partitionBy when outputState
fromStreams(streams[])	Selects events from the streams supplied.	**
Provides** partitionBy when outputState

Filters and transformations

Filter/Partition	Description	Notes
when(handlers)	Allows only the given events of a particular to pass through the projection.	**
Provides** $defines_state_transform transformBy filterBy outputTo outputState
foreachStream()	Partitions the state for each of the streams provided.	**
Provides** when
outputState()	If the projection maintains state, setting this option produces a stream called $projections-{projection-name}-result with the state as the event body.	**
Provides** transformBy filterBy outputTo
partitionBy(function(event))	Partitions a projection by the partition returned from the handler.	**
Provides** when
transformBy(function(state))	Provides the ability to transform the state of a projection by the provided handler.	**
Provides** transformBy filterBy outputState outputTo
filterBy(function(state))	Causes projection results to be null for any state that returns a false value from the given predicate.	**
Provides** transformBy filterBy outputState outputTo

Handlers

Each handler is provided with the current state of the projection as well as the event that triggered the handler. The event provided through the handler contains the following properties.

• isJson: true/false
• data: {}
• body: {}
• bodyRaw: string
• sequenceNumber: integer
• metadataRaw: {}
• linkMetadataRaw: string
• partition: string
• eventType: string
• streamId: string

Handler	Description	Notes
{event-type}	When using fromAll() and 2 or more event type handlers are specified and the $by_event_type projection is enabled and running, the projection starts as a fromStreams($et-event-type-foo, $et-event-type-bar) until the projection has caught up and moves to reading from the transaction log (i.e. from $all).
$init	Provide the initialization for a projection.	Commonly used to setup the initial state for a projection.
$initShared	Provide the initialization for a projection where the projection is possibly partitioned.
$any	Event type pattern match that match any event type.	Commonly used when the user is interested in any event type from the selector.
$deleted	Called upon the deletion of a stream.	Can only be used with foreachStream

Functions

Handler	Description
emit(streamId, eventType, eventBody, metadata)	Appends an event to the designated stream
linkTo(streamId, event, metadata)	Writes a link to event to the designated stream

Debugging

User projections you create in JavaScript have a bonus that debugging is easier via any browser that ships with debugging capabilities. The screenshots in this document show the use of Chrome, but we have tested debugging with all major browsers including Firefox, Edge and Safari.

Logging from a projection

For debugging purposes, projections includes a log method which, when called, sends messages to the configured EventStoreDB logger (the default is NLog, to a file, and stdout).

You might find printing out the structure of the event body for inspection useful.

For example:

fromStream('$stats-127.0.0.1:2113')
    .when({
        $any: function (s, e) {
            log(JSON.stringify(e));
        }
    })

Creating a projection for debugging

Filename: stats-counter.json

Contents:

fromStream('$stats-127.0.0.1:2113')
    .when({
        $init: function () {
            return {
                count: 0
            }
        },
        $any:  function (s, e) {
            s.count += 1;
        }
    })

You create the projection by making a call to the API and providing it with the definition of the projection.

curl -i [email protected] \
  http://localhost:2113/projections/continuous?name=stats-counter%26type=js%26enabled=true%26emit=true%26trackemittedstreams=true \
  -u admin:changeit

Debugging your first projection

Once the projection is running, open your browser and enable the developer tools. Once you have the developer tools open, visit your projection URL and you should see a button labelled Debug.

Projections Debugging Part 1

After clicking the projection "Debug" button, you see the debugging interface with the definition of the projection and information about the events the projection is processing on the right-hand side.

At the top there are a couple of buttons to take note of, specifically the Run Step and Update buttons. You use Run Step to step through the event waiting in the queue, placing you in projection debugging mode. The Update button provides you with a way to update the projection definition without having to go back to the projection itself and leave the context of the debugger.

Projections Debugging Part 2

If the Run Step button is not greyed out and you click it, the browser has hit a breakpoint.

Projections Debugging Part 3

You are now able to step through the projection, the important method to step into is the handler(state, eventEnvelope) method.

Configuring projections

By changing these settings, you can lessen the amount of pressure projections put on an EventStoreDB node or improve projection performance. You can change these settings on a case-by-case basis, and monitor potential improvements.

Warning

You can only change the configuration of a stopped projection.

You change the configuration of a projection by setting the relevant key and value in a request, or when you create a projection with the web admin interface.

Web admin interface projections configuration screen

Emit options

These options control how projections append events.

In busy systems, projections can put a lot of extra pressure on the master node. This is especially true for EventStoreDB servers that also have persistent subscriptions running, which only the master node can process. If you see a lot of commit timeouts and slow writes from your projections and other clients, then start with these settings.

Emit enabled

The emit boolean setting determines whether a projection can emit events and any projection that calls emit() or linkTo() requires it. If this option is not set and a projection attempts to emit events, you see an error message like the following:

'emit' is not allowed by the projection/configuration/mode

EventStoreDB disables this setting by default, and is usually set when you create the projection and if you need the projection to emit events.

Track emitted streams

The trackemittedstreams boolean setting enables tracking of a projection's emitted streams. It only has an affect if the projection has EmitEnabled enabled.

Tracking emitted streams enables you to delete a projection and all the streams that it has created. You should only the setting if you intend to delete a projection and create new ones that project to the same stream.

Warning

By default, EventStoreDB disables the trackemittedstreams setting for projections. When enabled, an event appended records the stream name (in $projections-{projection_name}-emittedstreams) of each event emitted by the projection. This means that write amplification is a possibility, as each event that the projection emits appends a separate event. As such, this option is not recommended for projections that emit a lot of events, and you should enable only where necessary.

Tips

Between EventStoreDB versions 3.8.0 and 4.0.2, this option was enabled by default when a projection was created through the UI. If you have any projections created during this time frame, it's worth checking whether this option is enabled.

Max allowed writes in flight

The MaxAllowedWritesInFlight setting sets the maximum number of writes to allow for a projection. Because a projection can write to multiple different streams, it's possible for the projection to send multiple writes at the same time. This option sets the number of concurrent writes that a projection can perform.

By default, projections try to perform writes as quickly as they come. This can add a lot of pressure to a node, especially for projections that emit to different streams. If you see your projections causing frequent commit timeouts or slow reads, you can try lowering this value to see if there is any improvement.

Tips

Lower values may cause the projection to slow down as the number of writes are throttled, but the trade-off for this is cleaner logs and fewer commit timeouts.

By default, this is unbounded, allowing a projection to write as fast as it can.

Max write batch length

The MaxWriteBatchLength setting sets the maximum number of events the projection can write in a batch at a time.

Default: 500 (events).

Checkpoint options

Checkpoints store how far along a projection is in the streams it is processing from. There is a performance overhead with writing a checkpoint, as it does more than append an event, and writing them too often can slow projections down.

We recommend you try other methods of improving projections before changing these values, as checkpoints are an important part of running projections.

Checkpoint after Ms

The CheckpointAfterMs setting prevents a new checkpoint from being written within a certain time frame from the previous one. The setting is to keep a projection from writing too many checkpoints too quickly, something that can happen in a busy system.

The default setting is 0 seconds, which means there is no limit to how quickly checkpoints can be written.

Checkpoint handled threshold

The CheckpointHandledThreshold setting controls the number of events that a projection can handle before attempting to write a checkpoint. An event is considered handled if it actually passed through the projection's filter. If the projection is set to checkpoint every 4,000 events, but it only reads from the foo stream, the projection only checkpoints every 4,000 foo events.

Default: 4000 (events).

Checkpoint unhandled bytes threshold

The CheckpointUnhandledBytesThreshold setting specifies the number of bytes a projection can process before attempting to write a checkpoint. Unhandled bytes are the events that are not processed by the projection itself.

For example, if the projection reads from the foo stream, but writes from the bar stream comes through, a checkpoint is written after this number of bytes have been processed. This prevents the projection from having to read through a potentially large number of unrelated events again because none of them passed its filter.

Default: 10 (MiB).

Processing options

Pending events threshold

The PendingEventsThreshold setting determines the number of events that can be pending before the projection is paused. Pausing the projection stops the projection from reading, allowing it to finish with the current events that are waiting to be processed. Once the pending queue has drained to half the threshold, the projection starts reading again.

Default: 5000 (events).

Projection Execution Timeout

The ProjectionExecutionTimeout setting specifies per event projection processing timeout. If an event is not processed within the specified duration, the projection will fault and won't process further events.

Tips

Increase value of this setting if projection handler is compute intensive or server is under heavy load

Default: 250 (ms).

Settings in this section concern projections that are running on the server.

Warning

Server-side projections impact the performance of the EventStoreDB server. For example, some standard system projections like Category or Event Type projections produce new (link) events that are stored in the database in addition to the original event. This effectively doubles or triples the number of events appended and therefore creates pressure on the IO of the server node. We often call this effect "write amplification".

Projection runtime

An Interpreted runtime was introduced in 21.6.0 to replace the existing V8 runtime.

The ProjectionRuntime option can be used to select which runtime the Projection Subsystem should use. We only recommend changing this setting if you observe a difference in behaviour between running an existing projection on the Legacy runtime versus the Interpreted runtime.

Format	Syntax
Command line	--projection-runtime
YAML	ProjectionRuntime
Environment variable	EVENTSTORE_PROJECTION_RUNTIME

Default: Interpreted, use the new Interpreted runtime by default.

Accepted values are Interpreted and Legacy.

Run projections

The RunProjections option tells the server if you want to run all projections, only system projections or no projections at all. Keep in mind that the StartStandardProjections setting has no effect on custom projections.

The option accepts three values: None, System and All.

When the option value is set to None, the projections subsystem of EventStoreDB will be completely disabled and the Projections menu in the Admin UI will be disabled.

By using the System value for this option, you can instruct the server to enable system projections when the server starts. However, system projections will only start if the StartStandardProjections option is set to true. When the RunProjections option value is System (or All) but the StartStandardProjections option value is false, system projections will be enabled but not start. You can start them later manually via the Admin UI or via an API call.

Finally, you can set RunProjections to All and it will enable both system and custom projections.

Format	Syntax
Command line	--run-projections
YAML	RunProjections
Environment variable	EVENTSTORE_RUN_PROJECTIONS

Default: None, all projections are disabled by default.

Accepted values are None, System and All.

Projection threads

Projection threads are used to make calls in to the V8 JavaScript engine, and coordinate dispatching operations back into the main worker threads of the database. While they carry out none of the operations listed directly, they are indirectly involved in all of them.

The primary reason for increasing the number of projection threads is projections which perform a large amount of CPU-bound processing. Projections are always eventually consistent - if there is a mismatch between egress from the database log and processing speed of projections, the window across which the latest events have not been processed promptly may increase. Too many projection threads can end up with increased context switching and memory use, since a V8 engine is created per thread.

There are three primary influences over projections lagging:

• Large number of writes, outpacing the ability of the engine to process them in a timely fashion.
• Projections which perform a lot of CPU-bound work (heavy calculations).
• Projections which result in a high system write amplification factor, especially with latent disks.

Use the ProjectionThreads option to adjust the number of threads dedicated to projections.

Format	Syntax
Command line	--projection-threads
YAML	ProjectionThreads
Environment variable	EVENTSTORE_PROJECTION_THREADS

Default: 3

Fault out of order projections

It is possible that in some cases a projection would get an unexpected event version. It won't get an event that precedes the last processed event, such a situation is very unlikely. But, it might get the next event that doesn't satisfy the N+1 condition for the event number. The projection expects to get an event number 5 after processing the event number 4, but eventually it might get an event number 7 because events 5 and 6 got deleted and scavenged.

The projections engine can keep track of the latest processed event for each projection. It allows projections to guarantee ordered handling of events. By default, the projections engine ignore ordering failures like described above. You can force out of order projections to fail by setting the FailOutOfOrderProjections to true.

Format	Syntax
Command line	--fault-out-of-order-projections
YAML	FaultOutOfOrderProjections
Environment variable	EVENTSTORE_FAULT_OUT_OF_ORDER_PROJECTIONS

Default: false